Illinois roofing costs
Illinois roof replacement cost calculator.
A typical roof replacement in Illinois costs about $15,846 to $41,282 on a typical 2,000 sq ft roof, depending on material. The calculator below prices any size and material at 2026 Illinois market rates, from $8.00 per square foot for Class 3 shingles to $20.75 for standing seam metal. A contractor uses your roof's measurements and inspection findings for the final quote.
Last reviewed: July 2026
Cost calculator
Estimate your roof replacement cost.
Built from current market rates for installed roofing. The breakdown on the right shows where the planning estimate comes from and what a contractor must confirm.
Adjusted to Illinois market rates, about 19% above the national average.
Roof type
Material grade
The normalized range assumes ordinary one- or two-story access. Steep, unsafe, or equipment-dependent access must be measured and priced in the written scope.
Items to scope separately
These items are not generic allowances because their specifications and quantities must be documented first.
Price compatible sealing details only when the exact roof scope names them.
Price the specified membrane, coverage area, and substrate preparation separately.
Confirm intake balance and attic suitability, then price the documented ventilation scope separately.
Estimated total
$15,846
Planning range $11,961-$19,250 for 2,000 sq ft of class 3 shingles at Illinois rates.
| Line item | Amount |
|---|---|
| Installed roofingClass 3 Shingles at $8.00/sq ft | $11,961-$19,250 |
| Typical estimate | $15,846 |
Based on current market averages for installed roofing, adjusted for Illinois. Your actual price depends on measured roof geometry, access, color and warranty choices, code upgrades, and inspection findings. Steep access, damaged decking, and optional upgrades require a written property-specific scope and are not estimated here.
2026 Illinois roofing rates at a glance
Every figure below is the national market baseline adjusted to Illinois conditions. Totals show a typical 2,000 sq ft roof, installed:
| Material | Illinois rate / sq ft | 2,000 sq ft roof |
|---|---|---|
| Class 3 shinglesArchitectural asphalt | $8.00 | about $15,846 |
| Class 4 shinglesImpact-resistant asphalt | $9.25 | about $18,298 |
| R-panel metalExposed-fastener metal | $13.00 | about $26,049 |
| Standing seamPremium metal | $20.75 | about $41,282 |
Typical Illinois market pricing for 2026, see our pricing methodology. A contractor uses your roof’s measurements and inspection findings for the final quote.
Calculator questions, answered
How are the Illinois roof cost calculator numbers built?
The Illinois roof cost calculator uses state-localized 2026 per sq ft rates for common roofing materials, including $8.00 for Class 3 shingles, $9.25 for Class 4 shingles, and $20.75 for standing seam metal. It turns your selected roof size into a planning estimate, not a final bid. The contractor you consider hiring should provide the final number after measuring pitch, roof lines, access, and repair needs.
What can move a real Illinois roof bid above or below the calculator range?
A real Illinois roof bid can move above or below the calculator range because of roof pitch, tear-off layers, decking condition, flashing detail, ventilation, access, and material choice. Steep or difficult access can increase labor and safety setup, while a simple roof with clean access may price closer to the lower side. The calculator is built for planning, and the final quote should reflect the roof your roofer actually measures.
Should I enter roof area or home area in the Illinois roof cost calculator?
Enter roof area in the Illinois roof cost calculator when you have it, because roof area is the number used for materials and labor. Home area is only a starting point, since pitch, overhangs, attached garages, and waste usually make the roof larger than the floor plan. If you only know home size, use the calculator as a rough guide until your roofer measures the roof.
Go deeper on Illinois roofing
Calculate by state
Roof cost calculators for every state we serve.
- Alabama
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- Florida
- Georgia
- Idaho
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming
Ready for your real Illinois number?
Call now, or answer a few quick questions to check phone availability. An independent roofing contractor that serves your area confirms the property-specific scope and final price.
